AquaRimat’s Flowless unit is a Smart Water Meter, which learns a building’s habits of water usage, detects any types leaks in real time (even in drops), notifies users of leaks, and enables remote water shut-off. The Flowless system is the most advanced technology solution for leak detection, water damage prevention, water education and savings, and the control of your water system.
What Equipment / System is the Demonstration Project Replacing or Augmenting? One HVAC unit of 5+tons and 5+years in age. Or a Refrigeration unit of 1.5+HP compressor and 5+years old.
Expected Savings: Average water savings 15-30%
What Equipment / System is the Demonstration Project Replacing or Augmenting? The Flowless smart water meter is available in ¾”, 1”, 1.5”, and 2” and is a supplemental meter installed anywhere after the city meter on the property (including outdoors and indoors).
Duration of Demonstration (if relevant): Yes, volume discounts will be provided. Cost of Demonstration: Each Flowless unit cost is between $1000 – $2500 depending on size of unit.
Ayyeka provides cyber-secure, plug-and-play, remote monitoring solutions designed for water and energy infrastructure.
Ayyeka’s Wavelet offers a cyber-secure, autonomous, and comprehensive solution of all components and services required for remote infrastructure monitoring.
After defining the customer’s needs, sensors are pre-integrated with the Wavelet platform which is then ready for plug-and-play installation onto existing infrastructure.
Collected data can be stored on Ayyeka’s secure private cloud server, or be integrated directly into the client’s servers. Data gathering can include a wide variety of elements and is sensor agnostic.
Data may include a wide variety of inputs including water turbidity, salinity, flow rate and energy usage.
– Real Time monitoring of water and energy systems operations
– Reduction in labor costs associated with physical monitoring
– Reduction of water and energy usage from better systems level information and real time data
Expected Savings: : 10% water savings, 10% energy savings, and unlimited savings potential in case the equipment detects a water leak or other hazardous event.
What Equipment / System is the Demonstration Project Replacing or Augmenting?
The demonstration project replaces manual samples and monitoring equipment that is designed for one specific use or segment. Ayyeka can identify the water flow into buildings, monitoring gray water systems, prioritize repairs for infrastructure, streamlines existing data collection systems, can operate remotely and act as a redundant monitoring system.
Duration of Demonstration (if relevant): ): 6-10 weeks
Cost of Demonstration: $5,000 to $20,000. The cost depends on the type of unit and order customization.
BK Litec’s S1 LED Lamp is a high power retrofit solution designed to replace conventional HPS/MH lamps by screwing seamlessly into existing outdoor/industrial fixtures (decorative, high bay, and road lighting). The S1 lamp’s core technology is the HS Frame, an LED Module with a proprietary heat dissipation architecture that enables the design of LED solutions that do not require a heat sink or PCB. This unlocks form factor freedoms in our LED design, making possible the construction of the S1 lamp that mimics the shape, screw in capability, and omnidirectional illumination properties of conventional bulbs. In addition, the absence of heat sinks creates additional space within the cavity of the S1 for potential internal housing of sensor/remote monitoring devices.
Expected Savings: 50%-70% lighting energy savings
What Equipment / System is the Demonstration Project Replacing or Augmenting? The S1 lamp is a direct replacement solution for conventional high power metal halide, high pressure sodium bulbs (100w-400w). The S1 is designed to screw into existing fixtures, which also includes a simple ballast bypass procedure.
Duration of Demonstration (if relevant): Ideal measurement time frame would be 6-12 months
Cost of Demonstration: he S1 lamps, drivers, and measurement equipment would be provided by BK Litec Inc. free of charge
Cypress Envirosystems’ Wireless Pneumatic Thermostat (WPT) system retrofits existing pneumatic thermostats to enable auto-demand response, improved asset utilization and lower maintenance costs. It provides the same comfort, energy and maintenance benefits as traditional DDC building automation zone-level controls, but in contrast to rip-and-replace DDC retrofits, WPT projects are fast, do not disrupt building occupants, and cost up to 80% less. The WPT integrates seamlessly with central BAS systems to so advanced control strategies can be executed.
– Two-year payback (typical)
– Reduced maintenance costs
– Increase comfort
– Demand management: Pre-cooling and auto-demand response capabilities
Expected Savings: 15-25% HVAC energy savings
What Equipment / System is the Demonstration Project Replacing or Augmenting? The WPT system retrofits legacy pneumatic thermostats.
Duration of Demonstration (if relevant): 3 months.
Cost of Demonstration: No cost for City of Los Angeles, negotiable for other LABBC Partners
Daintree Networks® is a leading provider of smart building control and operation solutions. Daintree enables building energy management using open standards-based wireless controls for several different applications including: lighting, plug load & thermostat based HVAC controls. Depending on the project scope environmental sensing and general purpose controls can be included. Typical installation includes wireless area controller, wireless occupancy sensors, photo sensors, cloud-based server, software license, dimmer switches, thermostat, and plug load controller.
Expected Savings: The savings depend on the existing baseline energy consumption and controls on the site. 30-40% savings are common.
What Equipment / System is the Demonstration Project Replacing or Augmenting? Lighting, plug-loads and thermostat controls.
Duration of Demonstration (if relevant): 6-12 months.
Cost of Demonstration: Cost will depend on the building type and design with 10% discount for LABBC Partners. The factors that go into building the BOM: granular or zonal; warehouse, commercial office, or retail; lighting only or multiple measures like thermostat, plug load, etc.
Using technology derived from years of research and development by a team of petrochemical engineers and scientists, Flow-Tech HVAC has created one of the most technologically advanced chemical free water treatment systems available on the market today. It couples time tested proven science with an innovative proprietary signal introduction method that replaces chemical treatment programs and water softeners. The Flow-Tech system induces an electromagnetic field into the piping network that disrupts the formation of bio film, which keeps the microbes suspended within the fluid as either individual cells or small clusters that can be treated by ongoing chemical treatment, or removed during blow-down through filtration. The technology prevents scale; controls bacteria, biofouling, and corrosion; reduces blowdown water usage; and reduces or eliminates chemical use.
Expected Savings: 30% water savings
What Equipment / System is the Demonstration Project Replacing or Augmenting? The Flow-Tech HVAC water treatment system replaces other forms of cooling tower water treatment (chemicals, pulsed-power, water softeners, etc.).
Duration of Demonstration (if relevant): Usually 90 days so that corrosion coupons can be measured properly.
Cost of Demonstration: The only potential cost would be related to the service visits required to monitor and document system operation.
Fluid Dynamics provides effective non-chemical water treatment for the prevention of lime scale. No water is wasted and since power, consumables and maintenance are not required, considerable cost savings can be expected over the long 15+ year life of the installation.
Expected Savings: up to 30% savings on cooling tower discharge water.
What Equipment / System is the Demonstration Project Replacing or Augmenting? The Fluid Dynamics installation would replace any existing scale preventing equipment or chemical dosing program if present; an ion exchange water softener for example.
Duration of Demonstration (if relevant): The minimum scope of work that would credibly demonstrate the effectiveness of our technology would consist of preventing scale in an appliance that has a history of being affected by hard scale accumulation. For a small unit the suggested duration is one month.
Cost of Demonstration: The product price will be determined by flow rate at the installation point and whether multiple units are needed such as when hot water recirculation is present. In order to get an installation price, it is best to consult a mechanical contractor unless the property has an on-site maintenance staff capable of carrying out the job.
HydroPoint’s WaterCompass is real-time monitoring for leak detection and water conservation. With WaterCompass, you can continuously monitor water usage of one site or across an entire portfolio from a single dashboard, including domestic water (bathrooms, kitchen, drinking fountains, etc.), cooling towers, irrigation systems and water-based fire suppression systems. It’s the ideal solution for property managers, facilities engineers and management and sustainability professionals to solve high water use and be warned of leaks.
Expected Savings: Depends on water rate, but range from $2,000 to $31,000
Adding a device to an existing water meter. Device passes the magnet at the meter register and sends data to the cloud via pre-packaged 36 cell modem.
Demonstration Area / Square Footage Requirement (If Applicable): N/A
Duration of Demonstration (if relevant): 90 days to 1 year
NALCO Water, an Ecolab Company, is reinventing the way water is managed with the new fit-for-use solution for cooling water management, 3D TRASAR™ technology and services. 3D TRASAR™ system provides real time feedback on the water quality allowing for tight chemical dosage control. The data and its interpretation allows uniform system maintenance and monitoring. The primary benefit is improved results from chemical treatment because the TRASAR™ technology reduces system variability and greatly improves treatment control.
Expected Savings: 20-30% water savings
What Equipment / System is the Demonstration Project Replacing or Augmenting? The 3D TRASAR™ system would replace the existing water treatment and controller.
Duration of Demonstration (if relevant): 3 – 6 months
Cost of Demonstration: NALCO is offering a no-cost demonstration for a period of 3 to 6 months. If the demonstration is successful, the equipment must be paid for or it can be removed at no charge.
Rain Systems’ patented Precision Injection Machine is the most cost-effective, technologically advanced solution to reducing irrigation requirements for turf. The technology injects a cross-link polymer (CLP) at root level into existing turf without damaging it. Once injected the CLP helps conserve 50% of the water needed to irrigate and maintain healthy, green grass. CLP is EPA tested, environmentally safe, 100% biodegradable and is fully effective for up to 5 years.
Expected Savings: 50% reduction in water costs typically used in turf irrigation
What Equipment / System is the Demonstration Project Replacing or Augmenting? We would be augmenting any irrigation systems monitoring devices that are currently on site and on the market.
Demonstration Area / Square Footage Requirement (If Applicable): 300-500 square feet would be ideal.
Duration of Demonstration (if relevant): The pilot would take about 4 months, the product itself will conserve water for up to 5 years.
The Philips Lighting Spacewise system offers the benefits of deep energy savings, scalability, and a commitment to quality to ensure tenant satisfaction. Spacewise is easy to install and can be configured throughout your building that uses embedded sensors and wireless controls to maximize energy savings. The dimming technology provides automated granular dimming in response to both occupancy sensing and daylight harvesting. As SpaceWise is a stand-alone system, all luminaries using are auto-calibrated therefore requiring no manual commissioning.
Expected Savings: Up to 75% lighting energy savings
What Equipment / System is the Demonstration Project Replacing or Augmenting? Lighting System
Duration of Demonstration (if relevant): N/A
Cost of Demonstration: Dependent of size & scope of demo project
SynapSense Corporation, a Panduit company, is a leading provider of energy efficiency-focused, Data Center Infrastructure Management (DCIM) solutions that deliver visibility, resiliency, and reliability in leading data centers around the world. SynapSense® is part of Panduit’s “SmartZone™” Solutions – a suite of Data Center Infrastructure Management (DCIM) solutions. SynapSense is a Wireless Environmental Monitoring & Control Solution designed to optimize the energy efficiency of Data Center cooling systems.
– Assess (Project energy savings and ROI)
– Instrument (Baseline & trend data center operational conditions)
– Optimize (Improve airflow management and save energy)
– Control (Dynamically maintain the optimized state)
– Sustain (The increased reliability and operational efficiency)
Expected Savings: 20-40% of cooling energy with ROIs of less than 3 years.
What Equipment / System is the Demonstration Project Replacing or Augmenting? Data Center Cooling Systems.
Duration of Demonstration (if relevant): Assessment Service typically takes 4 hours.
Cost of Demonstration: Free.
– FREE Online Demo of SynapSense® Web Console
– Energy Assessment Services for qualified customers that complete:
– Attachment-8 SynapSense® Customer Site Survey Information Sheet.xls
Sloan’s innovative hybrid urinals, featuring patented technology from Falcon Waterfree
Technologies, don’t require water after every use, and there is no need for manually cleaning the housing and drain line. This innovative fixture combines a world-class, multi-patented urinal cartridge with their JetrinseTM Solution Technology that will keep urinals and drain lines clean, hygienic, odor-free and clog-free.
Expected Savings: 99-100% Water Savings compared to any conventional flush urinals
Demonstration Area / Square Footage Requirement (If Applicable): N/A
UgMO Technologies’ product line uses wireless soil moisture sensors that are completely buried in each zone of the landscape. The sensors report soil data back to the irrigation controller and based on the data received, the controller waters each zone according to its needs. Directly measuring soil moisture in the soil and watering each zone individually based on its needs, results in both great water savings and healthier lawns and landscapes. UgMO typically saves a property 40-80% on their irrigation water consumption.
Expected Savings: 40-80% of irrigation water consumption.
What Equipment / System is the Demonstration Project Replacing or Augmenting? The UgMO product will replace the current irrigation controller.
Duration of Demonstration (if relevant):30 to 90 days depending on all test parameters, but UgMO will show water savings potential after the first watering cycle.
Cost of Demonstration: No cost for the test period.